FULL1018(2500W) > 스피커

스피커

HOME > 제품소개 > 스피커

스피커 | FULL1018(2500W)

본문

  • 특징
  • 스펙
  • 구성도
  • 응용사례
  • 응용자료

3-way active system composed by three elements: an active bass cabinet and two passive satellites.

Belonging to the FULL series, well known for its combination of compact size and high performance,
FULL1018ST was conceived to satisfy, in medium-sized rooms, the requirements of both bands looking for the best tool to convey their musical emotions by means of a solid, linear, versatile and no-frills system, as well as the expectations of the most demanding DJs who, with a really small, lightweight and easily transportable system, are able to recreate the sensation of being in front of a very large PA.The FULL1018ST architecture is directly inspired by the other systems of the FULL series and, thanks to the on-board Montarbo DSP controller, it is possible to adapt the system's response to the roomacoustics, monitor the temperature of the power amplifiers, set the time delay for use in sound reinforcement applications and customize the tonal response in order to create a customized sound character.
The bass cabinet, fitted with an 18" woofer, incorporates all the circuitry for the signal processing and power amplification of the entire system. It is equipped with three class-D amplifiers, featuring switching-mode power supplies, controlled by a Montarbo DSP processor (56 bit, 180 MHz, with 24 bit conversion), which handles all the functions of filtering, equalization, delay, limiting and diagnostics. This DSP utilizes an advanced algorithm for real-time control of each amplifier's power output and temperature (both internal and external) as well as including a dedicated standby function which results in reduced power consumption when no signal is present. 5 presets are available, one of which may be customized by the user and stored in the DSP memory, thus adapting the speaker's acoustic response to the user's own personal taste. The presets may be modified with the Montarbo proprietary RAConLSTM software program, supplied with the optional LD2.4 USB interface. With a single LD2.4 USB interface it is possible to operate up to 8 speaker systems by means of PC remote control, making it possible to: program a custom preset and store it in the DSP or store an unlimited number of them in the PC; adjust the frequency response by means of a 10 filter 'full parametric' equalizer; adjust the time delay and output level of each speaker system; and check the signal level and thermal conditions of the power amplifier.


APPLICATIONS
- Medium size clubs.
- DJ sets.
- Any kind of live or recorded music reproduction.
- Fills medium open-space venues with maximum accuracy.
- Stage monitor at large events (in-fill, monitor for the rhythm section, etc.). 

- Recording studios, control rooms. 

TABELLA GENERICA

SystemStereo 3-way active system
Componentscustom designed on Montarbo specifications
Satellite FULL10P1 x 10” woofer (3” voice coil) with shielded ventilated neodymium magnet; 1 x 1” compression driver (1.7” voice coil), high directivity 80° x 60° wave guide horn
Bass cabinet FULL18STT 1 x 18” woofer (4” voice coil) with shielded ventilated neodymium magnet
Frequency response37 - 20.000 Hz (of complete system)
Max SPLFULL10P: 130 dB max SPL. FULL18ST: 133 dB max SPL half-space
Electronic cross-over100 Hz
Amplifier3 class D power units (SMPS)
LF output power1 x 1000 W
HF output power500 + 500 W
Total output power2000 W EIAJ
DSPMontarbo, 56 bit / 180 MHz, conversion 24 bit 5 presets, 1 of which is custom-programmable on the DSP. Remote control and customization by PC with Montarbo proprietary RAConLSTM software program and the USB LD2.4 interface (optional accessory).
Connessioni e controlliFULL10P: 4-pole Speakon® for the connection to the sub FULL18ST: 4-pole Speakon® connector for the connection to the satellites; Signal input and link balanced XLR connectors; volume control; Status Led indicators (signal, clipping, thermal warning protection); active preset LED indicator; RJ45 DATA connectors for the two RS485FD serial interfaces for the connection to a PC (Montarbo net); PowerCon® connectors for mains power supply (input+link).
ConstructionBirch plywood, high-impact, chip-resistant paint
FittingsCarrying handles M10 threaded inserts (on FULL10P cabinet) Stand adapter for coupling the two system’s cabinets
Dimensioni (w x h x d)FULL10P: 302 x 516 x 256 mm FULL18ST: 512 x 522 x 550 mm
WeightFULL10P: 14,5 kg FULL18ST: 34,5 kg

  

주소 : 포천시 자작로 1길 30 (11158)
Tel.031-532-8356 | Fax.031-532-8359 | E-mail.nicemic9256@daum.net
사업자:207-01-85252 | 대표자: 승인수
Copyright ⓒ nicemic.co.kr All rights reserved.
관리자로그인 현대이지웹 바로가기